Surface Treatment: | Mill Finish | Technique: | Cold Drawn |
---|---|---|---|
Alloy: | 1,3,4,5,6,7,8 Series | Origin: | China |
Package: | Standard Export Wooden Case | HS Code: | 7606 |
Material: | Aluminium | Use: | Food,Kitchen Use,Pharmaceutical,Package |
Type: | Roll | Temper: | Soft,Half Hard,Soft Or H24,O/H18,O |
High Light: | industrial aluminium foil,aluminum sheet metal roll |
Jumbo Roll Industrial Aluminum Roll Foil for Radiator Condenser Evaporator
Aluminium Foil Can be used in a variety of heat exchange constructions where the basic function is to efficiently transfer heat. Also this fin foil can be used for evaporator and condenser in most residential, automotive, and commercial air conditioning units. In addition, this foils are used in humidifiers, dehumidifiers, baseboard space heaters of various types, and other equipment.
Beside increased global performances, an all-aluminum brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
Condensers
Evaporators
Oil coolers
Radiators
Heater cores
Chemical Composition | ||||||||||
No | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
1 | 1050 | ≤ 0.25 | ≤ 0.40 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | --- | ≤ 0.05 | ≤ 0.05 | ≤ 0.03 |
2 | 1100 | ≤ 0.95(Si+Fe) | 0.05-0.20 | ≤ 0.05 | --- | --- | ≤ 0.10 | --- | --- | |
3 | 1197 | ≤ 0.15 | ≤ 0.20 | 0.40-0.55 | 0.10-0.20 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
4 | 3102 | ≤ 0.40 | ≤ 0.70 | ≤ 0.10 | 0.05-0.40 | --- | --- | ≤ 0.30 | --- | ≤ 0.10 |
5 | 3R03 | ≤ 0.15 | ≤ 0.15 | ≤ 0.01 | 0.90-1.10 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |